Hazardous Storage. Champion Materials Handling

Storage Vaults

From £2,909.16 incl VAT

Adjustable vent meets the requirements of both Flammable Storage (vent closed) and Agrochemicals (vent open)
All welded units conforming to the A.P.E.A. Construction requirements
These vaults provide a half hour protection from collapse and the passage of fire
Multi-lockable for high security, and fitted with a lift up action lid assisted by gas struts
Middle shelves pivot on models SSV01Z and SSV02Z to enable larger items to be stored on the base level
Model SSV02Z: Clearance height between the bottom and top shelf is 363mm. Clearance height
between top shelf and lid is 255mm
Model SSV03Z has a central partition and four shelves - the two middle shelves fold away and the two top shelves are made in 3 sections, the back section is fixed in position and the front two sections removable
All models have a liquid-tight base to contain spillage
Please not: A Fork Lift will be needed to unload all these vaults

From £1,221.37 incl VAT

All units have a height of 2230mm
Available Ex-Stock - Ask about our Installation Service
Site Survey, CAD Design and Installation Service Available - please call for details

£1,768.86 incl VAT

No fixing required - Simply secure this unit by using six 600 x 600m paving slabs (not supplied)
Fabricated from robust Heavy Duty Box Section
Complemented by Tri Wall fluted Plastic side panels & Galvanised sheet Steel roof
Can also be used as a Smoking Shelter
Fork Lift needed for offloading

Call for pricing

Side & roof panels are manufactured from 0.6mm cold rolled corrugated galvanised steel & for additional strength the unit has a structural frame which is fitted at each end & at the centre of the unit
The sump is manufactured from 2mm structural grade galvanised steel & is fitted with base plinths to keep the underside of the units out of contact with the ground
The double doors, fitted with 3 upper & 3 lower vents in each door, are located on one of the short sides of the unit & are secured with a Kale mortis lock with cylinder (152R)
Complete with two sets of shelves (60kg shelf U.D.L.) on each of the long sides of the unit
Fork lifting pockets are underneath the units

Call for pricing

FM & TUV/GS Approved
For cleaning parts & sub-assemblies where the volume of work does not warrant a larger rinse tank
Dip tank covers stay open for convenient access; self-closing mechanism & fusible link metals at 74°C to snap the cover shut in case of fire

Call for pricing

FM & TUV/GS Approved
Easy means of cleaning small parts in solvents
Simply place work on spring loaded, perforated dasher plate, press down, agitate, then release to return dasher to drain position
Plated steel dasher also works as an effective flame arrester to reduce the risk of fire flashback
Hinged cover minimizes evaporation losses & protected rim reduces the possibility of hand injury

Call for pricing

FM & TUV/GS Approved
High density polyethylene disposal cans provide superior chemical resistance & leak protection
Spring loaded sealed cap, normally closed, automatically vents between 3 & 5 psig (0.2 & 0.35 bar)
Stainless steel handle & hardware with latch-catch system hold the cap in the open position for easy filling & pouring
Large mouth opening features a built-in stainless steel flame arrester to guard against outside ignition
Current carrying, patented carbon insert embedded in the container allows for proper grounding
Broad base design provides stability & resists accidental tip over

Call for pricing