Shelters & Stores. Champion Materials Handling

Chemstore - Drum & IBC Secure Stores

Call for pricing

20 year structural guarantee
Base is manufactured from 3mm mild steel with RHS cross members & pressed ribs
Corner posts, shelf frames & main rails are rolled hollow section
The roof is pressed with suitable bracing & fully welded around the perimeter, while the back,
side & door panels are pressed from 2mm mild steel sheet & corrugated where required
Fitted with crane lifting points (maximum 2000kg per lift point) & sliding doors
The floor area above the sump is covered with galvanised steel channel sections so that
loose drums or pallets can be stored directly onto it, whilst the upper shelf is an open box section
which is designed to support pallets. Grid mesh shelving is available - please call for details
Shot blasted before being painted (RAL 6029) for greater durability
Other colours are available - please call for details
EDRIB9624 - push back system above the sump, allowing the units to be pushed to the back of the units

From £81.84 incl VAT

£5,869.26 incl VAT

From £2,784.58 incl VAT

Powder coated sheet steel side & back panels
Adjustable feet for on - site positioning
Parabolts for surface mounting to concrete included. Must be bolted to 250mm thick concrete for stability
High capacity shelters can be created using runs of initial & extension shelters or double depth shelters
Shelter height: 2100mm
These Shelters combine with the Traditional Cycle Racks
Available in Light Grey, Blue or Green, please specify when ordering or call for details
Supplied Knock Down

From £1,880.65 incl VAT

Galvanised sheet steel side & back panels
Adjustable feet for on - site positioning
Parabolts for surface mounting to concrete included. Must be bolted to 250mm thick concrete for stability
High capacity shelters can be created using runs of initial & extension shelters or double depth shelters
Shelter height: 2100mm
These Shelters combine with the Traditional Cycle Racks
Available in Light Grey, Blue or Green, please specify when ordering or call for details
Supplied Knock Down

£5,200.38 incl VAT

£496.55 incl VAT

Swings & pivots, allowing the light to be positioned to illuminate the inside area of a vehicle during (un)loading
All units emit 1000 lumen light output
Extended arm length of 1060mm
P21 for indoor applications only

From £258.98 incl VAT

Used for loading and unloading vehicles from a raised loading area
Typically for use with pallet trucks, sack trucks, roll cages & pedestrian access
Standard features; manufactured from high tensile aluminium with built in anti-slip finish, loop type handles for movement & one pair of locking legs to prevent movement
Options; fork truck handles (FTH-1) for movement by fork truck (recommended for plates marked) & side curbs with castors (SCC-2) to aid movement